During the maintenance of the automatic terminal machine, if you want to say what is more important, refueling must be one of them. The following introduces the four points that must be paid attention to in the refueling process. With the R & D and upgrading of the terminal machine, there is no need to refuel too frequently, which greatly reduces the work of the maintenance technician. We only need to strictly follow the safety operation procedures of the automatic terminal machine, and the equipment will be very stable.
In fact, it is often talked about the maintenance and refueling of automatic terminal machines. Other automatic equipment also needs refueling. Today, tin dipping machine | automatic tin dipping machine | full automatic tin dipping machine | automatic tin dipping machine manufacturer | Ruixin automation will introduce to you the four points that must be paid attention to in the maintenance and refueling of automatic terminal machines:
1. Where to add
There are several places that need refueling. Generally speaking, there are three categories.
1.1. Stamping guide rail
Because the terminal machine needs to do the action of crimping the terminal frequently, the stamping guide rail is easy to wear, so here is the most important thing to pay attention to, and lubricating oil is added here.
1.2. Main speed bearing
In fact, as long as there are bearings, we need to pay attention to them, and the main speed bearing bears most of the power transmission. We need to focus on refueling. Here is butter.
1.3. Other parts to be lubricated
All parts requiring lubrication due to friction caused by action need to be refueled, but many places do not need to be refueled frequently, so many terminal machine manufacturers do not specifically mention it, but it is still something we need to pay attention to. We can't add it, but we have to check it regularly. If abnormalities are found, we still need to refuel, and these maintenance things should be treated flexibly.
2. How much
Add 2-3 drops of lubricating oil in general daily maintenance, depending on the situation. There is no need to add too much. It can ensure sufficient lubrication and not easy to cause wear. The place where butter needs to be added is also a truth, but it is best to operate according to the instructions according to the conditions of different models.
3. How often
If the stamping guide rail is a key concern, it may need to be added once every 1 hour. Other lubrication parts shall be added according to the actual situation, taking no wear as the standard.
4. Refueling method
4.1. Oiling method for parts to be lubricated
Check the oil quantity → check whether there is oil shortage → if there is oil shortage, add 2 - 3 drops of lubricating oil; if there is no oil shortage, do not add lubricating oil
4.2. Oil filling method of main speed bearing
Open the rear cover of the terminal machine → remove the circlip of the driven pulley → remove the pulley → apply grease (evenly on the surface of the high-speed bearing) → restore
Conclusion: when refuelling, be sure to operate according to the precautions of use safety specifications to avoid accidents. With the development of terminal machines, terminal machines are no longer refuelled as frequently as before, but many businesses still have previous machines or existing machines and still need to refuel occasionally. Then this article hopes to be helpful to you.
