At present, there are two kinds of parameter setting of the computer stripping machine in the market, one is controlled by keys, and the other is controlled by touch screen. In fact, the principle is the same. The data such as cutting and peeling length of both ends can be controlled by digital adjustment, but the touch screen is more convenient to adjust, and the price is of course slightly higher. The above figure shows the control panel of the touch screen computer stripping machine. Generally, open the parameter setting of the display screen through the parameter setting key, such as the front stripping length, half stripping length, total length, etc. The total length determines the total length of the finished line, that is, the length of the cut line. The parameter setting can be digitally debugged through the display screen.
1. Set the terminal Harness according to the specific productionBecause different products require different molds, abnormal wear may occur if the parameters of the corresponding molds are set incorrectly. In fact, one of the reasons for the tool wear of the automatic terminal machine is the wrong parameter setting.
2. Harness tension parameter setting
The production of different terminal harnesses will correspond to different pulling forces. There is usually a comparison table of wire tension of fully automatic terminal machine, and specific parameter settings should be made according to this table.
3. Speed parameter setting
Although we all think that the higher the efficiency of wire harness production, the better, it is impossible to adjust to the maximum value. We should set the corresponding speed parameters according to the actual production situation to achieve the most appropriate speed.
Ruixin automatic terminal machine, crimping machine automatic terminal machine | automatic terminal machine manufacturer | automatic tin dipping machine | automatic tin dipping machine manufacturer | automatic crimping machine | wire harness crimping machine | connector wire harness crimping machine automatic crimping machine Ruixin automation, welcome new and old customers to consult