What is the functional configuration of the automatic terminal machine? Fully automatic terminal machine refers to a kind of machine wire processing machine, also known as automatic peeling and pressing machine. A new equipment has a set of multi-functional machines, which feed, cut, peel and crimp together. It is a humanized and intelligent high-end technical product, suitable for large, medium and small enterprises and saves labor.
2. Three phase five wire wheel: transport cable and stripping group outlet. The automatic terminal machine strips both the wire knot and the wire tail (the wire length is less than 50mm) when stripping the short wire of the stock. In the case of stripping by the automatic terminal machine, in addition to stripping the wire knot, it also has the function of stripping the middle several.
3. Adjustment knob for working pressure of three-phase five wire wheel of automatic terminal machine: adjust the working pressure of three-phase five wire wheel of automatic terminal machine, rotate clockwise after pulling out, the working pressure of three-phase five wire wheel will increase, and rotate in the opposite direction after pulling out, the working pressure of three-phase five wire wheel will decrease. (it is determined according to the compressive strength of the wire skin of the cable, that is, the difficulty coefficient of stripping the wire skin. If it is difficult, the working pressure will increase, and if it is easy, the working pressure will decrease).
4. Three phase five wire wheel gap adjustment knob: adjust the three-phase five wire wheel gap of the automatic terminal machine, expand the upward rotation gap and reduce the downward rotation gap (adjust according to the size of the cable).
5. Group outlet wheel gap adjustment knob: adjust the group outlet wheel gap for the automatic terminal machine. The upward rotation gap expands and the downward rotation gap decreases (adjusted according to the size of the cable).
6. Three phase five wire wheel extension knob: when the automatic terminal machine is installed, the three-phase five wire wheel is extended. Rotating the knob clockwise is to extend the three-phase five wire wheel, so that the cable can be successfully crossed; When working, learn to put down the three-phase five wire wheel and rotate the knob in the opposite direction to learn to put down the three-phase five wire wheel and press the cable.
7. Group outlet wheel extension knob: when removing the cable, extend the group outlet wheel, and rotate the knob in the opposite direction to extend the group outlet wheel, so that the cable can be removed successfully; When working, learn to put down the outgoing wheel of the group. Turn the knob clockwise to learn to put down the outgoing wheel of the group. (when the short stripping process is used, the outgoing line wheel of the group shall be extended).
8. Adjustment knob for working pressure of group outgoing line wheel: adjust the working pressure of group outgoing line wheel for automatic terminal machine. After pulling out, rotate in the opposite direction, the working pressure of group outgoing line wheel will increase, and after pulling out, rotate clockwise, and the working pressure of three-phase five wire wheel will decrease. (it is determined according to the compressive strength of the wire skin of the cable, that is, the difficulty coefficient of stripping the wire skin of the automatic terminal machine. If it is difficult, the working pressure will increase, and if it is easy, the working pressure will decrease).
8195.