The terminal machine is a kind of machine used for wire processing. It can press five gold heads to the wire end and then conduct. The terminals made by the terminal machine are usually used for more convenient connection, and the two wires can be stably connected together without welding. And you just need to unplug it when you remove it. It is a kind of wire end treatment equipment, mainly used in electronic factories. How to deal with the alarm of wire harness processing equipment?
1. Error code alarm
If there is an error code alarm, the corresponding error code is directly displayed. In fact, this is very easy to handle. As long as you take out the corresponding manual of the automatic terminal machine, there is usually an error code comparison table in it, and you can quickly locate the possible problem.
2. Red light alarm
Generally, this alarm light will display three colors: green, yellow and red. Green indicates normal, yellow indicates normal fault, and red indicates serious fault. It may be necessary to stop the line for fault treatment.
For example, whether the motor is out of step and the driver alarm light is red is a typical serious problem.
3. Sound alarm
Just like the alarm of the computer motherboard, the length of the sound and the alternation of the length of the sound are used to replace the different signals, and the error type can also be judged according to the different sound combination signals. There is also a reference code table.
If you have problems, please contact Ruixin. Dongguan Ruixin specializes in terminal machines for more than 20 years, and is committed to research, development, production and sales. The main products are: crimping machine automatic terminal machine | automatic terminal machine manufacturer | automatic tin dipping machine | automatic tin dipping machine manufacturer | full automatic crimping machine | wire harness crimping machine | connector wire harness crimping machine automatic crimping machine Ruixin automation.
